Strip Poker 388 Posted May 30, 2009 Posted May 30, 2009 Heres a pair I bought for my GF long time ago.There are From The Wild Pair, they had a brass lower heel which was to low allmost 5in, I made these out of stainless steel,that way they wouldnt wear down as bad.
Strip Poker 388 Posted June 1, 2009 Author Posted June 1, 2009 how did you do this The shoes heel has a male threaded stud coming out of it,I chucked up a 3/8 inch bolt in my drill press and cut it down,then taped the big end to screw onto the shoe.Ya don't see many shoes with this style heel anymore.Also this was the hard way to do it,The brass is allot easier to work with,She since has wore out the shoes and I keep the metal heels
thighhighguy Posted February 2, 2010 Posted February 2, 2010 Very very nice end result, well worth all the effort
Dr. Shoe Posted February 2, 2010 Posted February 2, 2010 The heel on the black shoes is "kicking out" quite badly. You need to take about a bit off the bottom or you will break the heel or the shoe. Graduate footwear designer able to advise and assist on modification and shoe making projects.
Bubba136 Posted February 2, 2010 Posted February 2, 2010 The shoes kinda look like the same style that you can purchase from Sexy Shoes. metal heels Being mentally comfortable in your own mind is the key to wearing heels in public.
hh&c fan Posted August 5, 2010 Posted August 5, 2010 say do you know where to order metal heels? Or where you can find manufacturers who can produce some?
Heelster Posted November 16, 2010 Posted November 16, 2010 say do you know where to order metal heels? Or where you can find manufacturers who can produce some? If the heel will screw out as described, you might be able to find a machinist buddy to make you a set. I personally have never seen anyone wear metal heel tips. Hec, anything over 4" in my neck of the woods is considered pushing it, even for the female population.
Recommended Posts